telos ABIC 2 Analyser

PJF7992 and PJF7993 (also referred to as ABIC 2) are base station ICs manufactured by NXP Semiconductors targeted for the automotive market. It utilizes a single wire LIN connection according to ISO 17987-1 for communication. The protocol of the ABIC 2 requires some special handling of LIN signals and commands which is not supported by most LIN bus analysers on the market. The telos ABIC 2 Analyser was designed to seamlessly integrate with the device and to support all standard and special protocol functions.
  • Connects to a host PC via  USB
  • Connects to the LIN bus via single wire LIN interface
  • No extra power supply required
  • Monitors communication with the ABIC2 on the LIN bus; besides standard LIN operations the ABIC2 special mode
    Buffered Communication is supported
  • Extra test pins available for additional digital signal monitoring.
  • Solid plastic housing with a standard DSUB-15 connector for all relevant signals
  • Limitations: The special mode
    Transparent Transponder Communication is not supported

  • Displays Messages in both, raw data and interpreted format
  • Ability to store an arbitrary number of messages to disk for later evaluation
  • Host software runs under Windows Vista, and Windows 7 on 32 and 64 bit platforms
  • Automatic firmware update feature
  • The software can be downloaded here
  • Solid plastic housing with a standard DSUB-15 connector for all relevant signals
  • Extra test pins available for additional digital signal monitoring

Pin Pin
1 NC 9 LIN
2 GPIO 5 10 VCC Out 3.3 V @ 100 mA
3 GPIO 6 11 GPIO 4
4 NC 12 GPIO 3
5 NC 13 GPIO 2
6 NC 14 GPIO 1
7 GND 15 VCC In (GPIO)
8 VCC In (LIN) / ADC 3

The following pinning has been used for boards sold until august 2011 (serial numbers: 1BE5, 70B1, AAAC, 32CD, 2C64, 1B29, 0705, 7CC2, 352C, 5C71, 0FD9, 6107):

Pin Pin
1 NC 9 ADC 3
2 NC 10 VCC Out 3.3 V @ 100 mA
3 GPIO 6 11 GPIO 4
4 NC 12 GPIO 3
5 VCC In (LIN) 13 GPIO 2
6 LIN 14 GPIO 1
7 GND 15 VCC In (GPIO)
8 GPIO 5

The telos ABIC 2 Analyser is delivered by FedEx.

Software and documentation is provided online; please install the software from this location.

This page serves as your manual. Please come back to us in case you are missing something.

Additionally, you need a standard  USB cable and a DSUB 15 connector.

Order

2.948,00  Add to basket