The data can be displayed in several manners to get an overview of all messages and to get the detail information of each message. Timestamp information for each byte is available. The global statistics display the number of transmitted bytes and message.

 

 

 

 

 

 

 

 

Use the "Line View" to get an overview of the displayed traced messages. Alias names are used for some addresses. The global statistics at the bottom of the windows shows the information of all traced messages.

 

 

 

 

 

 

Use the hardware/software filter to reduce the data in the pc memory or to show only the data of interest.

You can set filter for the addresses the direction (r/w), the sub addresses (data bytes after the address) and the transmission status. For each bit a 0, 1 or X (don’t care) can be set to filter e.g. a group of addresses. As described before you can optional use device names instead of the address.