 - Figure 1 Pin Assignment
Levii is equipped with two Mini-DIN connectors for the two I2C buses. Figure 1 shows the pin assignment.
| PIN |
Description |
| 1 |
SDA |
| 2 |
TEST1 |
| 3 |
GND |
| 4 |
VCC |
| 5 |
SCL |
| 6 |
TEST2 |
| Supply Voltage (Vcc) |
0 V to 6,0 V |
| Input Voltage (all lines) |
0 to Vcc |
| Temperature Range |
0 °C to +40 °C |
| Sink Current (all lines) |
200 mA |
Warning: Stresses beyond those listed may cause permanent damage to the device!
| |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
1,8 |
- |
5,5 |
V |
| Max. Transfer Speed |
0 |
- |
800 |
kHz* |
| Serial Resistance |
- |
22 |
- |
Ohm |
| Internal Pull-up |
- |
10 |
- |
kOhm |
*) Accelerated  Fast Mode (Fast Mode ist specified with 400 kbit/s only). This means that boosting, as specified for the I2C High-Speed Mode above 400 kbit/s, is not supported.
- Dimensions: 28 * 42 * 68 mm
- Material: plastic housing
- Weight: 40 g
Values may differ.
|
