16-06-03 18:00
 |
I want to test my I²C-bus environment with high traffic but there are delays between the messages that I have sent with Tracii 400. How can I reduce the delay between the messages?
Before Tracii 400 can send the message they must be transmitted from the PC to the hardware via the parallel port. If the message was sent via the I²C-bus before the next message was transmitted completely in Tracii 400 buffer, a delay occurs. To reduce the delay between the messages always send the same message. In this case the data transmission via the parallel port has to be conducted only once.
<- Back to: FAQ/Support