11-05-04 15:00
 |
When I use Tracii 400 in Slave Mode I donīt get an acknowledge for the address after the repeated start condition:
S - [10BitAddr1]w A - [10BitAddr2] A - [Data1]A...[DataN]A - S - [10BitAddr1]r NA - [Data1]NA...[DataN]NA - P
What can I do?
Due to a bug in the firmware Tracii 400 does not acknowledge the address after the repeated start condition.
This problem exists only if data were transmitted between the first 10 bit address and the repeated start condition.
To fix the problem update Tracii 400 with the new firmware (V1.3).
Please download the latest version from our website.
<- Back to: FAQ/Support