selected languagethis page is Englishno German page available

CANdice - Ethernet-Based CAN Interface

    

CANdice is a CAN interface which provides a powerful and ready-to-use solution for working with CAN networks.

Unlike other CAN interfaces on the market there is no need for a PC slot or a particular operating system. Instead the interface acts as a stand-alone network device and is accessed using standard ethernet technology. This allows you to take full advantage of both the API and the user interface regardless of your operating system or PC architecture.



The user interface is written in 100% pure Java(tm). It is invoked from within your preferred webbrowser (e.g. Microsoft Internet Explorer or Mozilla Firefox) and does not require any installation. Working with the CAN interface is as easy as viewing a website.

For custom applications we provide a flexible command interface based on a TCP connection. Therefore custom applications can be developed on almost every platform that supports ethernet, even on embedded systems.


Key features

  • Send CAN messages with long or short IDs
  • Support for response messages
  • Receive messages as slave or monitor
  • Create log files in ASCII (text) format
  • Select Baud rates of 10, 20, 50, 125, 250, 500, 800 or 1000 kBaud
  • Configure various CAN bus parameters
  • Save/Restore settings to/from disk
  • Work as Master and Monitor in parallel
  • Instantly switch between master and analyser operation
  • Examine received messages while acquiring new data
  • Logical view of incoming data, i.e. separate status bits etc.
  • Smart filtering of addresses while monitoring
  • Support for "listen-only" mode
  • Hardware timer support
  • Configurable network parameters
  • Support for firmware updates
  • Standard 100 x 160 mm eurocard format
  • Uses standard wall plug style power supply
  • One year of free firmware upgrades and support