telos I2C Newsletter 2004/02 |
This is the telos I2C newsletter for February 2004. You may also read this text online at http://www.telos.info/i2cnewsletter/archive/200402.htm. Product News September 03 telos released Tracii XL, the most advanced I2C tool on the market.
telos is continuously working on the Tracii XL software packages I2C Studio and I2C Framework. Thanks to your feedback we could improve our products considerably. Starting today the product price is significantly decreased from 450 to 350 Euro.
There is a special and limited offer for the subscribers of this newsletter - please check for details below. New features - Master Timeout - if the SCL is held down for more than 500 ms the transfer is aborted.
- SCL/SDA Stretching Detection - Stretching is visualised in the status bar.
- The analog channel can be configured to start on NACK and ERROR conditions.
- Output testpins can trigger on NACK and ERROR conditions.
- I2C termination can be disabled.
Version 1.4.1 download http://www.telos.info/download/i2cstudio_e.htm New features - Some new functions of the I2C framework make it possible to poll the two input testpins of Tracii XL. E.g. this can be used to wait for external events. Additionally it is possible to trace the transitions of the input testpins (with timestamps of the transitions).
- Output testpins can trigger on NACK and ERROR conditions.
- The analog channel can be configured to start on NACK and ERROR conditions.
- Master Timeout - if the SCL is held down for more than 500 ms the transfer is aborted.
- I2C termination can be disabled.
- Added support for the "Universal Register Tool" (URT) and the "Universal Register Debugger" (URD). Both tools released by Philips Semiconductors can be used to manipulate and/or read out registers of ICs via I2C.
Version 1.4.1 download: http://www.telos.info/download/i2cstudio_e.htm#i2cframework unchanged since previous newsletter
Version 1.91 download: http://www.telos.info/uploads/media/tracii400_01.zip New features - Trigger on test-pin transition
When running in Master Mode a command can be started by a transition on the test-pins of Tracii 400. Tracii 400 starts sending/receiving data as soon as one of the pins has the requested status.
e.g.: Message 50w, 01, 02, 03, 04, t=10
=> Tracii 400 sends "01, 02, 03, 04" to the slave receiver with the address 50 if the testpin2 is high or if the tespin1 is low.
Version 3.50 download: http://www.telos.info/uploads/media/tracii400_01.zip unchanged since previous newsletter
Version 3.32, no download, contact telos. Special Offer Connii Promotion Buy 4 Get 5 Additionally to the decreased product price of 350 Euro there is a special promotion for the subscribers of this newsletter. For every 4 ordered Conniis you get one for free. Requirements: - Official purchase order received until 12th of March 2004
- This offer cannot be applied in conjunction with other discounts
- You have been a subscriber of this news-list on the 17th of February 2004
- Your order shows your subscription e-mail address and refers to this offer quoting "Promo0402"
About telos telos is primarily a development service provider for technical applications. We offer more than 15 years of experience in designing and implementing hard- and software for manufacturers of consumer electronics, automotive equipment and other industries. Contact | Phone | Fax | e-mail | Sales | +49 40 450173-60 | +49 40 450173-99 | 
| Support | +49 40 450173-61 | +49 40 450173-99 | 
| U.S. contact | dto. | (801) 846-7899 | dito. |
 This month we introduced a U.S. fax number. Now it is even more convenient for US customers to contact us by FAX - no international dialing is required anymore.
To avoid e-mail grabbing the above e-mail addresses are graphics.
Newsletter The newletter archive is available here: http://www.telos.info/i2cnewsletter/archive.php.
In case you want some colleague subscribing the newsletter, please pass this link http://www.telos.info/i2cnewsletter/sign_in.php.
To counter-order your subscription simply enter your e-mail address at http://www.telos.info/i2cnewsletter/sign_out.php. | 
